}

Products

OUR PRODUCTS

Manufactured 100% in the USA, KynSHOT™ recoil buffers are a hydraulic recoil buffer that is a direct drop-in replacement for any buffer system on the market. Utilizing our patented damping technology; KynSHOT recoil buffers are designed to reduce felt recoil, reduce muzzle rise, increase accuracy, and cut down on firearm component wear and tear.   

 

All of our products has undergone extensive impact, functionality, and life cycle testing to ensure unmatched performance. As a result of our extensive testing and design, KynSHOT recoil buffers can withstand and perform in any harsh environment, including temperatures from -30°F to 150°F. If you want the maximum performance for your firearm KynSHOT Recoil Buffers is the product for you! 

 

 

KynSHOT encourages everyone to follow the proper gun safety guidelines when handling any firearm at all times, and always abide by all local and federal laws.

 

KynSHOT recoil buffers are ECCN Controlled and is strictly prohibited for shipment outside of the United Sates without a valid export license issued by the United States Commerce Department, or U.S. Department of State. All interested international dealers or distributors, please refer to the International Traffic in Arms Regulation (ITAR) or contact our sales team for more information.

Select Your Product

Answer a few questions to find the best product for your application.

Please note this is only a guide as there are many factors that affect the proper KynSHOT recoil buffer selection. Consult factory if there is a question regarding the recommendation of the Product Selection Guide. If there is an existing buffer already in your weapon compare the length and weight of the KynSHOT buffer chosen to the one currently being used. KynSHOT is not responsible for any damages associated with an incorrect buffer selection. As always use proper firearms safety and abide by all local and federal laws.

AR-15 Recoil Buffers

AR15

KynSHOT RB5000

The KynSHOT RB5000 is a hydraulic recoil buffer engineered for AR-15 platforms with a Mil-Spec carbine buffer tube (7” internal depth).
AR15

KynSHOT RB5000HP (High Performance)

The KynSHOT RB5000HP is a hydraulic recoil buffer engineered for over-gassed AR-15 platforms and 9mm radial delayed blowback systems.
AR15

KynSHOT RB5000L

The KynSHOT RB5000L is a hydraulic recoil buffer specifically engineered for soft cycling or under-gassed AR-15 platforms.
AR15

KynSHOT RB5001

The KynSHOT RB5001 is a hydraulic recoil buffer engineered for AR-15 platforms equipped with Mil-Spec rifle-length buffer tubes, including A1 and A2 fixed stocks (9.5” internal depth).

AR-10 Recoil Buffers

AR10

KynSHOT RB5004 “Shorty”

The KynSHOT RB5004 is a hydraulic recoil buffer engineered for AR-10 platforms using Mil-Spec carbine buffer tubes with a 7” internal depth.
AR10

KynSHOT RB5005

he KynSHOT RB5005 is a hydraulic recoil buffer engineered for AR-10 platforms utilizing AR-10-length or A5 buffer tubes with a 7.75” internal depth.
AR10

KynSHOT RB5006

The KynSHOT RB5006 is a hydraulic recoil buffer engineered for AR-10 platforms equipped with Mil-Spec rifle-length A1 or A2 fixed stock buffer tubes (9.5” internal depth).
AR10

KynSHOT RB5030

The KynSHOT RB5030 is a hydraulic recoil buffer engineered specifically for the MR762. Its added weight and refined hydraulic design deliver smoother cycling and improved performance compared to other MR762 buffer options. It is fully compatible with the factory MR762 spring and installs easily as a drop-in replacement for the standard buffer system.

PCC Recoil Buffers

PCC

KynSHOT RB5007

The RB5007 performs reliably in builds with barrel lengths ranging from 3.5” to 7.5” when unsuppressed and works effectively with all common 9mm ammunition. Its carefully balanced weight and length ensure smooth operation, reduced recoil impulse, and proper cycling—stopping just behind the bolt catch. The buffer’s patented hydraulic technology absorbs the rearward energy of the bolt carrier, helping to eliminate bolt bounce during chambering.
PCC

KynSHOT RB5015HD (Heavy Damped)

The RB5015HD performs best in PCC builds with barrel lengths of 8 inches or longer, as well as in all suppressed PCC setups. It functions reliably across all 9mm ammunition types. Its weight and dimensions are carefully tuned for PCC platforms to ensure smooth cycling, reduced recoil, and proper bolt travel—stopping just behind the bolt catch. The patented hydraulic system absorbs the rearward energy of the bolt carrier, helping to eliminate bolt bounce during chambering.
PCC

KynSHOT RB5020SS Short Stroke

The KynSHOT RB5020SS Recoil Buffer is a hydraulic buffer system built specifically for competition shooters looking to improve sight recovery and achieve faster follow-up shots with pistol caliber carbines (PCCs).
PCC

R15015098 Spacer Weight

he KynSHOT Spacer Weight, developed in partnership with Blitzkrieg Components, is designed for use with both PCC and other KynSHOT AR hydraulic recoil buffers to increase mass at the front of the buffer system. It adds 0.75 inches of length and 2.5 ounces of weight, fitting closely within the buffer tube to help prevent buffer tilt during operation.
 

Pistol Guide Rods

PISTOL

KynSHOT x Jacob Grey PB6000, 4.25

The PB6000 was developed in collaboration with Jacob Grey Firearms, a premier manufacturer of 1911/2011 pistols. Known as the Jacob Grey Recoil Reaper, the PB6000 is an aftermarket upgrade designed to replace 4.25”–5” guide rods in a wide range of 1911/2011 platforms.
PISTOL

KynSHOT PB6003, Glock 19 Gen 3

The KynSHOT PB6003 Hydraulic Guide Rod is engineered as a direct drop-in replacement for standard guide rod assemblies used in Glock 19 Gen 3 slides and similar platforms, requiring no changes to your firearm’s existing configuration.
PISTOL

KynSHOT PB6004, Glock 17 Gen 5

The KynSHOT PB6004 Hydraulic Guide Rod is engineered as a direct drop-in replacement for standard guide rod assemblies used in Glock 17 Gen 5 slides and similar platforms, requiring no changes to your firearm’s existing configuration.
PISTOL

KynSHOT PB6005

The KynSHOT PB6005 Hydraulic Guide Rod is engineered as a direct drop-in replacement for standard guide rod assemblies used in the Glock 43x and similar platforms, requiring no changes to your firearm’s existing configuration. Its advanced design features a specialized damping system that ensures proper slide cycling while effectively controlling both movement and speed.
PISTOL

KynSHOT PB6006

The KynSHOT PB6006 Hydraulic Guide Rod is engineered as a direct drop-in replacement for standard guide rod assemblies used in Sig Sauer P365 XL and similar platforms, requiring no changes to your firearm’s existing configuration. Its advanced design features a specialized damping system that ensures proper slide cycling while effectively controlling both movement and speed.
PISTOL

KynSHOT PB6007, Glock 19 Gen 4 & 5

The KynSHOT PB6007 Hydraulic Guide Rod is engineered as a direct drop-in replacement for factory guide rod assemblies in Glock 19 Gen 4 and Gen 5 pistols, requiring no changes to your firearm’s existing configuration.
PISTOL

KynSHOT PB6002, P7K3

Designed and manufactured for P7Pro, the PB6002 is designed to be used with any P7K3.
 

Shotgun Recoil Buffers

SHOTGUN

KynSHOT RB5100 Adjustable Shotgun Recoil Buffer

The KynSHOT RB5100 Adjustable Damped Recoil Buffer for shotguns and tactical shotguns
SHOTGUN

KynSHOT RB5103 Non-Adjustable Shotgun Recoil Buffer

The KynSHOT RB5103 Non-Adjustable Recoil Buffer for shotguns and tactical shotguns
SHOTGUN

KynSHOT RB5022 Hydraulic Recoil Buffer for VR80™ Shotgun

The KynSHOT RB5022 VR80™ Shotgun Recoil Buffer features dual stage damping and the latest advances in recoil management.